ZhuZhou Advanced Ceramic Technology Co., Ltd
-
Product
-
Industries & Solutions
-
News & Events
-
About Us
language
Industries & Solutions
Whisker Ceramic Endmills CW10
Silicon Carbide (SiC) Whisker Ceramic Endmills
Whisker ceramic endmills are high-performance cutting tools made by reinforcing a ceramic matrix (typically alumina, Al₂O₃) with thin, rod-shaped silicon carbide (SiC) crystals. This advanced reinforcement fundamentally solves the brittleness of traditional ceramics, making them the ultimate solution for high-speed milling of difficult-to-cut materials, especially in deep cavity or long-overhang applications where carbide tends to snap.
Core Advantages (Enhanced Properties)
The deliberate addition of SiC whiskers significantly upgrades the tool's mechanical properties:
-
Superior Fracture Toughness: Reaches 6-8 MPa·m¹/², doubling the toughness of conventional alumina ceramics. This provides extreme resistance to chipping under heavy radial loads and high-feed milling.
-
Extreme Hardness: 1800-1900 HV (HRA 93.5-94.5), resisting abrasive wear 5-10x better than carbide.
-
Thermal Shock Resistance: Low thermal expansion suppresses thermal cracking during high-temperature, dry milling operations.
-
Chemical Stability: Low affinity to nickel and iron prevents built-up edge (BUE) and diffusion wear at 800-1200°C.
Recommended Applications
-
Aerospace: Profile milling and slotting of nickel-based superalloys (e.g., Inconel 718, Waspaloy) and titanium alloys, including jet engine casings, structural frames, and turbine components.
-
Die & Mold: High-speed milling of deep cavities and complex profiles in hardened steels and superalloys.
-
Automotive & Energy: High-efficiency roughing and semi-finishing of cast irons, cylinder heads, and gearbox housings.
Our Whisker Ceramic Endmill Grades
-
CW10: Designed for heavy interrupted milling and maximum fracture toughness. Ideal for slotting, machining parts with cross-holes, and first-pass roughing of aerospace casings.
-
CW25: Offers a balanced wear and toughness profile. Best for continuous to moderately interrupted profile milling, lasting 8-12x longer than carbide at 150-350 m/min.
![]() |
Grade: CW10 ISO: K10; S10 Features and Applications: Finishing of high-temperature alloys, high-hardness steels, and cast iron with focus on end milling finishing.
|
![]() |
Grade: CW25 ISO: K25; S25 Features and Applications: High-speed machining of nickel-based/cobalt-based alloys, cast iron, and high-hardness steels in continuous or light interrupted cutting.
|
ZhuZhou Advanced Ceramic Technology Co., Ltd
Service Hotline:
+86 15873369987
WeChat QR Code
Email:
Address: Room 101, Building A5, Small and Medium Enterprise Promotion Park, Huanghe North Road, Tianyuan District, Zhuzhou City, Hunan Province, China
Map Navigation→
Address: Room 101, Building A5, Small and Medium Enterprises Promotion Park, Huanghe North Road, Tianyuan District, Zhuzhou City, Hunan Province, China
-
-
Wendy
-
Ella
-
Scan
WeChat QR Code
Follow Us
-
Amychen

