ZhuZhou Advanced Ceramic Technology Co., Ltd

Industries & Solutions

Committed to becoming a leader in global ceramic cutting tool technology

TNGN Whisker Ceramic Inserts CW25


Silicon Carbide (SiC) Whisker Ceramic Inserts

Whisker ceramic inserts, also known as whisker-reinforced ceramic inserts, are high-performance cutting tools made by reinforcing a ceramic matrix (typically alumina, Al₂O₃) with thin, rod-shaped silicon carbide (SiC) crystals. This advanced reinforcement fundamentally solves the brittleness of traditional ceramics, making them the ultimate solution for machining difficult-to-cut materials at extreme speeds and temperatures.

Core Advantages (Enhanced Properties)

The deliberate addition of SiC whiskers significantly upgrades the insert's mechanical properties:

  • Superior Fracture Toughness: Reaches 6-8 MPa·m¹/², doubling the toughness of conventional alumina ceramics and surviving heavy interrupted cuts.

  • Extreme Hardness: 1800-1900 HV (HRA 93.5-94.5), resisting abrasive wear 5-10x better than carbide.

  • Thermal Shock Resistance: Low thermal expansion suppresses thermal cracking during high-temperature, dry cutting operations.

  • Chemical Stability: Low affinity to nickel and iron prevents built-up edge (BUE) and diffusion wear at 800-1200°C.

Recommended Applications

  • Aerospace: Heavy roughing and semi-finishing of nickel-based superalloys (e.g., Inconel 718, Waspaloy) and titanium alloys, including turbine disks and engine casings.

  • Automotive: High-volume machining of high-strength cast irons and hardened steels for engine blocks and drivetrain parts.

  • Steel Rolling Mills: High-speed milling and turning of mill rolls and fracturing blocks.

Our Whisker Ceramic Grades

  • CW10: Designed for heavy interrupted cuts and maximum fracture toughness. Ideal for parts with cross-holes, aero-engine casings, and first-pass roughing of turbine disks.

  • CW25: Offers a balanced wear and toughness profile. Best for continuous to moderately interrupted semi-finishing, lasting 8-12x longer than carbide at 150-350 m/min.

Grade: CW10

ISO: K10; S10

Features and Applications:

Finishing of high-temperature alloys, high-hardness steels, and cast iron with focus on end milling finishing.

Grade: CW25

ISO: K25; S25

Features and Applications:

High-speed machining of nickel-based/cobalt-based alloys, cast iron, and high-hardness steels in continuous or light interrupted cutting.